New
AC-DC SMP conversion IC Exceeds Global Energy-Efficiency Standards New from Power
Integrations is the LinkSwitch-II
family of highly integrated AC-DC switched-mode power conversion
ICs. By reducing the power supply component count by 30%,
it sets a new standard in the level of integration achievable
in a switching power supply design.
read more....
Eighth
Brick device expands PowerQor Family The PowerQor range of isolated dc/dc
converters, from SynQor Inc,
has been expanded with the announcement of the PQ60025ETL35.
read more....
Innovative eSIP Power Package A new series of AC-DC power conversion
ICs in the new eSIP-7C Eco-Single-Inline-Package, has been
announced by Power Integrations,
the leader in high-voltage analog integrated circuits for
power conversion.
read more....
High Efficiency 18-36V
I/P Eighth-Bricks A new range of isolated DC/DC converters
has been launched by SynQor, targeting the
industrial marketplace as part of the
ongoing expansion of its InQor product
range. read
more....
New Distributors SoughtCoupled with the introduction of their new Q-Series rectifier family, which help engineers improve the efficiency of their Power Factor Correcting boost converter circuits, power rectifier specialists Qspeed Semiconductor has announced that they are actively seeking distribution outlets in the UK and mainland Europe.read
more....
New Rectifiers Boost PFC
Efficiency Santa Clara, California - September 10,
2007 - Qspeed Semiconductor, designer and
manufacturer of innovative, energy-saving
power semiconductor devices, today
introduced its Q-Series rectifier family. read
more....
Power inductors suit
motion control and motor
drives Bourns' recently introduced SRP Series high
current power inductors, now available from
specialist distributor TTI Inc, are targeted at
applications requiring higher power, such as
motion control and motor drivers. read
more....
72V input dc/dc
converter for Railway &
Transportation
Applications A new 72V input Quarter Brick DC/DC
Converter series, introduced by SynQor,
complements their 110V devices targeting
Railway & Transportation Applications. read
more....
280% Peak Power from
power supply control IC An integrated power supply control IC with
the ability to deliver up to 280% power at
peak demands, has been introduced by Power Integrations, leader in high-voltage
analogue ICs for power conversion. read
more....
DC/DC converters for
industrial market Initial Offerings Designed for 12V Bus
Systems. A new range of Quarter Brick sized DC/DC
converters have been introduced by SynQor to address Industrial Applications running
from a 12V bus (operating range is 9-22V). read
more....
DOSA-Compliant POL
Devices Two new families of Non-Isolated, Surface
Mount, Point of Load converters have been
launched by SynQor, as part of their NiQor
family. They offer the benefit of ultra-wide
input and output configurations to address
the growing demands of today's
Intermediate Bus Architecture (IBA)
applications. read
more....
Sixteenth Brick Provides
up to 66W The first member in their fully 6/6, RoHS compliant,
sixteenth brick DC/DC converter
family, has been announced by SynQor. The PQ60033SGL20 module has a full 36 -
75V Telco input range, and provides an
isolated 3.3V output with up to 66W of
useable power. read
more....
Miniature Point-Of-Load
regulator Specialist defence & aerospace industry
supplier Roband Electronics has developed a
new, miniature POL (point-of-load) regulator
for main power units and integrated circuits
in a wide variety of military and avionics
applications.
read more....
Integrated Switcher IC
family with Peak Power
capability is Industry
First A new family of ICs for power supplies with
peak-to-continuous power ratios of up to
3:1, has been introduced by Power
Integrations, the leader in high-voltage
analog integrated circuits for power
conversion. read
more....
28V Output Converter
Reduces Power
Dissipation by up to 40% A 28V output, 12.8A half brick dc/dc
converter specifically targeting Power
Amplifier designs, but equally suitable for
other applications such as powering fan
trays, has been announced by Synqor. read more....
Non-isolated DC/DC Converters
set new standard for IBA applicationsSynQorhas
added a new DC/DC Converter to its non-isolated, NiQor product
line, in one of the smallest packages in the industry. read
more....
Further expansion of energy
efficient, low power IC family for chargers/adapters
The latest addition to its growing portfolio of ICs designed
for low-wattage power supplies, has been introduced by Power
Integrations.
read more....
New IC Family Enables
World's Simplest Cell- Phone Chargers
The leader in high-voltage analog integrated circuits for
power conversion, Power Integrations,
has announced a new family of ICs that enables the design
of energy-efficient, low-power and low-cost battery chargers
using only 14 components. read
more....
DC/DC converter with 6.25V
O/P current is 91% efficient An important
extension to its Giga family of Eighth Brick dc/dc converters
has been announced by power conversion specialists SynQor,
with the addition of a 75W/12V output device capable of delivering
up to 6.25A of output current. read
more....
Power Integrations Enables Compliance
with New Energy Standards in China Power Integrations Inc,
the California based inventor of EcoSmart energy efficiency
technology, has announced that its high-voltage integrated circuits
enable manufacturers to comply with energy efficiency standards
issued recently read
more....
New
AC-DC SMP conversion IC Exceeds Global Energy-Efficiency Standards
Eighth
Brick device expands PowerQor Family
