|
A unique film developed by New Jersey based
Sensor Products, reveals pressure
distribution, and its magnitude, between
any two contacting or impacting surfaces.
Pressure map of a heat seal application
|
Pressurex is a thin, mylar-based film which
is placed at the actual contact surface,
where it instantaneously and permanently
captures the pressure profile. Similar in
philosophy to litmus paper, this pressure
profile is displayed by graduations in the
colour across the surface of the film, where
low pressures are denoted by shades of blue, graduating to red at higher pressures,
which are directly proportional to the
amount of force applied. Pressurex is
therefore ideally suited as an aid to QC/AQ
in both R & D and manufacture, assisting
typically in the assessment of heat sealing
and lamination processes; bolted or
gasketed interfaces; heat sinks, and a
variety of other pressure-sensitive
applications.
Free Samples of Pressurex may be obtained
by contacting -
Kristy Boylan
Technical Sales Support Specialist
Sensor Products Inc.
300 Madison Avenue
NJ 07960
USA
t: 1.973.884.1755 (Ext. 7119)
f: 1.973.884.1699
w: www.sensorprod.com/pressurex
e: kboylan@sensorprod.com
EDI-new-products-04/12/06
|
